| |
|
Indirect Heaters
Specifically
designed to safely heat gases or liquids over a wide
range of pressure and temperatures without the need
for high-pressure shell or a special design for each
application.
Firetube thermal efficiency of 70% is
the highest of any indirect heater offered for
oil and gas field applications.
High thermal efficiency results in lower operating
costs through fuel gas savings.
Combustible or heat sensitive fluids are heated in a
flow coil by the heat
transfer medium, completely isolated from the
firetube.
Firetube thermal efficiency of 70% is the highest of
any indirect heater offered for oil and gas field
applications. High thermal efficiency results in
lower operating costs through fuel gas sayings.
Firetube is always immersed in a clean, non-fouling
heat transfer medium.
Fresh water with corrosion or a freeze inhibitor as
required is the most common bath medium. High
boiling heat transfer oils, or proprietary organic
and inorganic heat transfer media can be used to
obtain higher temperatures (above 200°F/ 93°C).
Uniform heating of the transfer bath keeps the
process coil tube wall temperature low, reducing
scaling inside the coil; with no hot spots to cause
coil failure.
A wide range of interchangeable flow coils is
available for each heater size,
allowing easy selection of the correct coil
arrangement to satisfy heat transfer surface area
and pressure drop requirements.
The flow coils are supported independently of
firetubes and are easily changed to satisfy changing
field conditions or applications.
|
